Free shipping for orders over $59

Easy Guard™ - Car Handle Protection Film

Easy Guard™ - Car Handle Protection Film SNAPPYFINDS -

Easy Guard™ - Car Handle Protection Film

Regular price $ 20.00 USD Sale price $ 9.99 USD
15 reviews

Protect your door handle! 

Removing the scratches means getting the polishing tools out and putting in some elbow grease, at more severe cases maybe even having to go to a body repair shop for a touch up, which can be costly. 

This is where the handy Easy Guard™ - Car Handle Protection Film comes into play! Universally fitting any vehicle with a 'pull type' door handle, this clear PVC film covers the inside of the door handle preventing scratches accumulating over time, keeping your cars body paint pristine! 

This protection vinyl film will keep your vehicle's appearance by protecting its paint from chipping, scratching on your door handle paint. 

Suitable for all kinds of cars. Easy to install: Simply peel off and fix it on a clean, dry surface, do not wax or oil. 

Protect the door handles from scrapes and scratches.

Good toughness and strong scratch resistance. Every time the door is opened and closed, it will bring no small damage to the door handle.


Keep the paint around the door handle away from scratching with the help of the high quality protective film.

How to use:

1. Please handle concave to wipe clean ( for scratches, more need a protection, please use sand wax before use to slightly concave surface processing, the effect will be better )

2. Remove the bottom paper products, with a water spray, the rubber surface and concave hand evenly sprayed with a small amount of the mist

3. Let the glue surface concave and slide up and down or so, adjustments, and to the right position

4. Two thumb press the middle surface, into the character "one" to promote both sides, gradually squeezed out of the water

5. Press the middle finger plow surface upward, gradually squeezed out of the water, in case of cock or folds, with hot (cold) heat, and smooth it

6. Press the middle surface of knocking down finger, gradually squeezed out of the water, in case of cock or folds, with hot (cold) heat, and


  • Item Length: 9cm
  • Sticker Placement: Door & Waist line
  • Design: Color Change
  • Item Width: 8cm
  • Material Type: PVC colorless and transparent
  • Package: 4 pieces of one set 
  • Size: Approx. 9*8C


1. Please do not wash the car at least 3 days after you apply the stickers.

2. Compare the detail sizes with yours, please allow slight difference due to manual measurement


We do our best to source the most unique and innovative products we can find, and to make sure that you, our customer, always has the best possible experience when shopping with us.

If for some reason you don't have a positive experience with us, please let us know and we'll do whatever we can to make sure you are 100% satisfied with your purchase.

Shopping online can be intimidating, but we're here to make things easy.

We have 24/7/365 Ticket and Email Support. Please contact us if you need assistance

*Due to overwhelming demand, please allow 2-3 weeks for shipping, handling and delivery directly from manufacturer or our international warehouse.

Customer Reviews
4.7 Based on 15 Reviews
Write a Review
Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Pam P.

These are so much cheaper and the exact same as the dealer was selling. It doesn’t have a split in the sticker and looks better too.

Lisa G.

I purchased this product to install on my brand new 2019 Toyota 4 Runner. I made 2 mixtures, in separate squirt bottles, of an alcohol mixture to clean the area and soapy mixture for the application. The alcohol mix was 2 oz rubbing alcohol to 6 oz water. The soapy mix was 8 oz water and 2 to 3 drops of baby shampoo. I cleaned the area behind my door handles with the alcohol mix and dried with a soft cloth. I then lightly sprayed the area with the soapy mix, sprayed my fingers and then peeled the adhesive from the paper and sprayed the side to be attached. I lined up the adhesive where I wanted it and gently worked the bubbles out to the closest edge of the adhesive. It will be slippery so be patient. Once bubbles are gone, gently wipe dry with a soft cloth and work remaining small bubbles out. I did not like how one was positioned so I removed it and started the process again. I found that they can be adjusted as long as they don't set up for a long period of time.My car is white which makes it difficult to see the adhesive in pictures. I am going to apply another set to my husbands brand new black 2019 Honda Accord next. I hope they last and keep the paint behind our door handles from getting scratched from fingernails and rings.It is recommended that you do not wash the vehicle for at least 24 hours to allow adhesive to adhere well.

Prudence  .

These are thick enough to prevent scratches from rings/nails, etc., but unlike others, are not glued in place...meaning that when you mess up the first couple of times trying to place them under the handle, they can be pealed off and repositioned.


Very hard to place.

Johnathon  .

I received these installed on vehicle, not as easy as last ones i had on for 2 1/2 years. Had some body work done all but 3 were taken off. bought these......had on for roughly 3 weeks - turn yellow and when i removed them - the adhesive remanined and nothing will remove I will have to take it back to body shop to ask them to remove the adhesive.Worst product I've ever owned.

Sean  .

I really like it easy to install. Don't need to worry about scratch!

Sharika  .

Requires a little patience to install and some water

Delora  .

Happy with ithem

Ardell  .

I like the ease of installation and pre-cut to conform to the concave door handle area.

Marlo  .

worked well, at first it became hard to apply then i used Soap/Water spray to install it Easily. i would definitely recommend to use Soapy water.

Sterling  .

Overall this item is ok. For my particular situation it did not work. I tried to install on my 2018 civic however the cup of the door was too deep for this to apply smoothly. On other cars where it's shallower handle this may be just fine. The only other thing that I disliked was the glue on the back. I peeled it from the sheet and it left my fingerprints in the glue.

Edison  .


Secure Shopping

Pay with the world’s most popular and secure payment methods.

Worldwide Shipping

Handling time 1-3 business days. Estimated delivery between 7-10 business days.

24/7 Customer Support

We offer 24/7 support if you have any questions or concerns feel free to contact us. 

Satisfaction Guarantee

We stand by our high-quality products and your satisfaction is guaranteed.